profile error

The steps as follows: the pretreatment of interpolation data, interpolation algorithm achieved by calculating feed quantity of coordinate, profile error control, acceleration control for feeding quantity, interpolation points pre-evaluated by using bisection, and analysis of interpolation performance.

包括插补数据预处理，求坐标进给量以实现插补，轮廓误差和进给加速度控制采用对分法预估插补点及插补性能分析。

互联网摘选

General method of determination of rotational conicoid profile error

一种通用二次旋转曲面面轮廓度算法

互联网摘选

Influence of Front Rake of the Slotting Cutter on the Tool Endurance and Tooth Profile Error

插齿刀前角对刀具耐用度及齿形误差的影响

互联网摘选

Study on error online measurement for complex curved surface profile error of skew roller based on error separation technique

基于误差分离技术的斜轧复杂型面轮廓度误差在线检测方法研究

互联网摘选

Thinking based on comparison of measured gear data and standard digital gear model, the individual circular pitch error, base tangent length error and profile error of measured gear are tested.

基于实测齿轮数据与标准数字齿轮模型对比的思想，实现了实测齿轮的齿距偏差，公法线长度偏差以及齿形误差参数的检验。

互联网摘选

The fixing parameters are optimized by the program to reduce the profile error of hobs.

通过程序优化选取砂轮的安装参数,使得滚刀的齿形误差最小.

互联网摘选

The Influence of Tip Circle's Error on the Measuring Accuracy of Portable Tooth Profile Instrument

齿顶圆误差对上置式齿形仪测量精度的影响

互联网摘选

Harmonic suppression, non periodic and non closing in straightness profile error that bring about harmonic component distortion in slide error motion measurement are analyzed in detail.

分析了经典频域三点法测量直行部件运动误差时所存在的谐波抑制，直线度误差的非周期性、非封闭性以及端点不连续而引起的高阶谐波分量失真等方法误差。

互联网摘选

Study on Machining Principle and Analysis on the Profile Error of Globoid Cam

蜗形凸轮加工机理研究及廓面误差分析

互联网摘选

The approaching method is one kind of method which can conform to the least zone principle best. While obtains the shape error, the position error between measured profile and its theory profile can obtained.

该方法是一种符合最小区域原则的轮廓度误差评定方法，并且在得到形状误差的同时，可以得到被测轮廓与理论轮廓之间的位置误差。

互联网摘选

In this article, the measured profile is expressed by three cubed spline function, a precise mathematical model of evaluation is built and an approaching method for evaluating the profile error of the random plane curve is proposed.

采用三次样条函数拟合出被测物体的轮廓曲线，并建立了评定线轮廓度误差的精确数学模型，提出一种用逐次逼近思想来评定平面自由曲线的轮廓度误差的方法。

互联网摘选

A Study on the Practical Mathematical Model for Evaluating the Profile Error of Revolving Solid

回转体零件轮廓度误差评定方法的实用数学模型研究

互联网摘选

When the cam is ground, the tangential component of the circular velocity is variable, and the peak value occurs in the lift curves. This is an important cause of profile error.

凸轮磨削时，圆周速度切线分量是变化的，在升程曲线部分出现峰值，这是导致该部分出现轮廓误差的重要原因。

互联网摘选

The Error of Rectangle Spline Hob Profile Designed on the Theory of Plane Engagement

按平面啮合原理设计矩形花键滚刀齿形的误差计算

互联网摘选

Through regression analysis, a formulae of bitting profile error is given for reference.

最后,通过线性回归分析, 给出了拟合齿形误差的公式以供参考.

互联网摘选

This paper gives a calculating method of the error of rectangle spline hob profile designed on the theory of plane engagement, with the errors of some hobs calculated.

此文给出了按平面啮合原理设计矩形花键滚刀齿形的误差计算方法，并计算了几种规格的滚刀的齿形误差。

互联网摘选

The traditional method to find the profile surface of a cylindrical cam from a given pitch curve, for its theoretical error, cannot be applied in accurate control situation.

求解圆柱凸轮实际轮廓曲面的传统方法存在理论误差，不适用于需要精确控制的场合。

互联网摘选

On the basis of the analysis of the screw rotor form grinding process, the error control strategy that controls the divide error on rough grinding and profile error on finish grinding is presented.

分析了螺杆转子成形磨削加工过程，以此为基础提出了转子粗磨阶段控制分度误差，精磨阶段控制型线误差的误差控制策略。

互联网摘选

A convenient system is designed to calculate the tooth profile error. This system includes the calculation of the inner gear length bar size, the common normal line, the chordal thickness and so on.

设计出便于工人进行齿形误差计算的交互式系统，主要涵盖量柱距、公法线和弦齿厚等常用检测项。

互联网摘选

The part profile error is an item which has been applied widely in the national and international standard, but it is difficult to measure and evaluate.

轮廓度误差是零件形位公差国家标准和国际标准中应用广泛而又难于测量和评定的项目。

互联网摘选

Influence on Profile Error of Gears by Changes of Slip Factor During Ausform Finishing

齿轮热滚挤过程中滑动系数变化对齿形误差的影响

互联网摘选

Finally, a comprehensive summary is conducted to the tooth profile error, axial error, accumulative pitch error in gear shaving.

最后，对剃齿加工对工件齿形误差、齿向误差、周节累积误差等进行了较为全面的总结。

互联网摘选